• 01246 204978
  • overtonclocks@gmail.com

Tag Archive table regulator

Table Regulator – 18th century | Tick Tock Thursday

This week has seen us restore a very fine and rare precision table regulator of French manufacture. Dating from the Charles X period (1824 – 1830), This piece is in outstanding condition.

The case of this table regulator is veneered in exotic Bubinga and inlaid with contrasting Box Wood. Overall it produces a wonderful case which is glazed on all sides. The front and rear glasses being accessed by removing the pegged top and sliding the glass out. It has been constructed to minimise the ingress of dirt and dust.

The finely made and complicated 14 day duration movement is signed Nicole Paris and has a very large visible escape wheel with dead beat escapement mounted outside the back plate . There is micro adjustment for the beat adjustment. The size of the escapement allows the half second beat pendulum to allow the sweep second hand to rotate once in 60 seconds. The good quality pendulum has nine rod gridiron compensation.

The 4 3/4 inch silvered brass dial unusually displays day and date subsidiary calendar dials and is retained in a finely cast bezel of 6 1/4 inches in diameter which retains all of its original gilding. 

Please don’t confuse this hand made precision clock with the factory made mass produced items sold later in the Century. I doubt that this particular type clock was replicated.

It is 24 inches tall , 12 1/2 inches wide and 9 1/2 inches deep at the base.

Table regulator. a dark wood with an orange edge highlight, gold face rim and god pendulum, the face of the clock itself is silver in colour.

Post on Facebook