Clocks for Sale

Bulle Electricals Clock Circa 1934 [SOLD]

Bulle Electricals Clock

Manufactured in 1934, this bulle clock is in remarkable condition with a beautiful mahogany case and fully restored movement.
Having started my working life as an Instrument engineer and completing my degree in electronics, I have always had a passion for these pioneering clocks.

Bulle electric clocks were developed in France just prior to the Great War of 1914-1918. It was at time in the early 20th Century that there was a great deal of activity throughout Europe, the UK and USA in developing domestic clocks which would operate on battery power.
Two Frenchmen, working initially independently, on aspects of electric solenoids and clockwork mechanisms ultimately came together to create the Bulle clock.

Professor Marcel Andre-Moulin gained a Science degree in 1904 and his Doctorate in Science in 1910. He became a lecturer in Chronometry at the Faculty of Science Bensancon and then was named Director of that Institute.

By 1912 Andre-Moulin had developed the system of using a solenoid with a 3 pole tungsten magnet which, in 1914 he used to construct an electric clock.

Maurice Favre-Bulle was born in Bensancon, into a family of clockmakers. He studied at l’Ecole d’Horolgerie de Bensancon from 1885 – 1888 before joining his brother in taking over and running the family clock factory Favre-Heinrich. During the Great War Favre-Bulle worked at the engineering laboratories of the Faculty of Sciences of Paris, developing military timers, watches, timing systems and telegraphy.
At the end of the war Favre-Bulle joined with Marius Lavet to form La Societe Bulle et Cie, a company to develop prototype electric clocks.
In 1920 a patent was taken out by Favre-Bulle for an electric clock. The patentees were Favre Bulle and Madame Veuve Andre-Moulin, the widow of Marcel Andre-Moulin. The commercial exploitation of this patent followed.

In 1920 Compagnee Generale des Appareils Horo-Electrique was established to commence the commercial production of the Bulle clock.
During the period 1920 to 1952 production is estimated to have been some 300,000 clocks. All used the contact system as outlined in the original patent and over 100 different case designs were utilised.

As the years progressed the movement remained basically unchanged although new materials were introduced as they became commercially available, e.g. aluminium, Bakelite, chrome. Production was also started in England in 1934 and these clocks exhibited obvious differences to the French product, particularly in the direction of reducing the cost. This included lighter gauge metal, steel plate rather than brass, smaller half-arc magnets, etc.

Favre-Bulle died in April 1954, aged 84. Production ceased as he had no descendants and transistor control of electric clocks was imminent thus making the Bulle technology redundant

Interested in purchasing this piece? Book a viewing!

Bulle clock Movement
Bulle repeating instruction

Leave a Reply

Your email address will not be published. Required fields are marked *