Categories
Clock of the Week

Barrauds Mahogany Bracket Clock| Clock of the week

A beautifully well proportioned Georgian Deep Mahogany Striking Bracket Clock by Barrauds of London is our feature piece this week.
The Barrauds family were prolific Clock & Watchmakers, particularly specialising in Chronometers. Paul Philip Barraud was Master of Clockmakers Company in 1810 & 1811. He partnered Howells & Jamison in the late 18th century to make Mudges Timekeepers. He died in 1820, his two sons continued the business into the late 19th century.

The mahogany case is in a most lovely original condition having a brass binding to the base and very heavy gilt brass Corinthian columns to the four corners, each corner finished with a gilt brass finial. The pagoda type top features a finely cut fret panel to all four sides and again has a matching finial to the top. Two heavy brass handles adorn the sides and set the clock off nice against the unusual gilt brass sound frets.

This is an impressive clock and stands well giving it a presence and elegance you only get with Georgian clocks of this age. The painted dial bearing the name Barrauds, Cornhill, London is of a style that only lasted a few years and Brian Loomes called this era period two, Having Arabic numerals to the chapter ring and the family name of Barrauds only dates this clock to somewhere around 1800 – 1813.

The very well made five pillar fully engraved movement features a strike/silence and a date ring along with an anchor escapement. This clock was originally a crownwheel (verge) escapement clock but looking at the wear in the wheels and pinions, it was converted to Anchor escapement sometime in the late 19th century. This type of conversion was quite normal when the owner was wanting a clock with a more accurate and stable timekeeping characteristic and this conversion was done to a very high standard using very well made components.

I did contemplate “re-converting” the clock back to a crownwheel clock but have decided to keep it as intended by its former owner, because of the age of the conversion and the fact that it is part of this clocks history.
The clock also features a pull repeat function ( the cord has not been fitted in the photo) and the cord colour and bead can be chosen by you. The movement has been totally overhauled by me personally and has been restored to its original condition to match the condition of the case.


This piece and many others are currently available for purchase on our selling antiques page.

Unfortunately this piece has been purchased. However, we still have many pieces available for purchase on our selling antiques page.

Categories
Our Work Tick Tock Thursday

Thomas Johnson long case| Tick Tock Thursday

The sun is out and we have just finished this absolutely lovely local clock by Thomas Johnson of Chesterfield. This clock dates from somewhere between c1800 and c1830. It has a most wonderful inlaid oak case with shells and leaves and cross banding to the edges. This clock has the more unusual Arabic numerals to the dial. Featuring a floral display with real gold leaf highlights.

Thomas Johnson signature on a clock face
Thomas Johnson Long case Base section
Thomas Johnson Longcase

Post on Facebook

Categories
Our Work Tick Tock Thursday

18th Century Bracket Clocks| Tick Tock Thursday

A bit of case restoration on two beautiful 18th century bracket clocks. The first is a large, very deep red mahogany bracket clock by Barrauds of London. The case has heavy Corinthian columns to the four corners and ornate hand cut brass fretwork panel to the side. The painted dial with date ring has been sent away for sympathetic restoration of the winding holes as they have become chipped over time. The highly engraved movement is currently being totally overhauled by me and should be on test very soon.

The second clock is a lovely mid 18th century mahogany veneered clock by James Eley. James worked from 1753 to 1795 and he produced some very well made clocks. This particular one has the “better” cross cut mahogany veneer to the inner masking. Also featuring a lovely brass frets to the front top corners. The movement for this clock has a very highly engraved back-plate and verge (crownwheel) escapement. And also includes a complicated dial with two subsidiary dials, date ring and ornate spandrels.

Post from Facebook

Categories
Our Work Tick Tock Thursday

Style Georgian bracket clock 2| Tick Tock Thursday

This week we’ve finish the very rare Georgian bracket clock that we illustrated a few weeks ago. This well proportioned George II inverted bell top mahogany bracket clock by the 18th century maker Nathaniel Style. This clock has received the most careful of restorations to retain its original shellac finish. Which is in an amazing original condition and its original winding key.

It is not very often that a completely original base model clock appears in such amazing condition. When acquired by us, this clock was covered in many layers of grime and dust. Having spent at least 100 years in a dry attic of a large house. I have included a couple of photographs of the case being carefully cleaned to reveal its totally original finish. I have done this to demonstrate that we have not re-polished this clock in any way.

The very well made case is veneered in a good quality mahogany. With it being a base model it is devoid of any brass frills and fussiness and has a simple wooden fret to the two top corners of the front door and a substantial brass handle to the top. The rear door has been made far more substantially than is required and still has the case makers chisel marks that have been let in to allow the pendulum the swing freely. I cannot express how lovely this clock is and has to be seen to be believed.

The timepiece movement has a crown wheel (verge) escapement and has its original suspension holding the “free” pendulum. This type of escapement was a transition between the rigid knife edge type crown wheel escapement where the pendulum is directly connected to the pallet arbour and the anchor escapement with its separately suspended pendulum and reduced pendulum arc. This escapement has a large pendulum arc. This is demonstrated by the mock pendulum during operation but the maker is clearly trying to experiment with the new technological developments that were coming into horology. The movement has been totally overhauled by me. However it is in as original a condition as I can get it without removing any of its past history.

It is very rare that these timepiece clocks survived beyond the 19th century because they were in essence a base model without any frill, striking mechanisms or alarm work. They simply told the time. As was the case with “modern” 1950s mantle clocks of today. These basic clocks were mistreated and thrown away when worn out due to the cost of repairing them.

This clock has somehow managed to be carefully stored away when it finally became surplus to requirements or the cost of repair outweighed the value of the clock and stayed there for many years! The patina and simple elegance of this clock has to be seen to be fully appreciated. I believe it would be a very good addition to any collection or someone with an eye for Georgian style.

Nathaniel Style is recorded as working at Wood Street, Cheapside, London. Becoming free of the Clock makers Company in 1725 and retiring in 1773.

Post on Facebook

Categories
Clock of the Week

Nathaniel Style Bracket Clock| Clock of the Week

This week well proportioned George II inverted bell top mahogany bracket clock by the 18th century maker Nathaniel Style. This clock has received the most careful of restorations to retain its original shellac finish which is in an amazing original condition and its original winding key.

It is not very often that a completely original base model clock appears in such amazing condition. When acquired by us, this clock was covered in many layers of grime and dust having spent at least 100 years in a dry attic of a large house. I have included a couple of photographs of the case being carefully cleaned to reveal its totally original finish. I have done this to demonstrate that we have not re-polished this clock in any way. The very well made case is veneered in a good quality mahogany and with it being a base model it is devoid of any brass frills and fussiness and has a simple wooden fret to the two top corners of the front door and a substantial brass handle to the top. The rear door has been made far more substantially than is required and still has the case makers chisel marks that have been let in to allow the pendulum the swing freely. I cannot express how lovely this clock is and has to be seen to be believed.

The timepiece movement has a crown wheel (verge) escapement and has its original suspension holding the “free” pendulum. This type of escapement was a transition between the rigid knife edge type crown wheel escapement where the pendulum is directly connected to the pallet arbour and the anchor escapement with its separately suspended pendulum and reduced pendulum arc. This escapement has a large pendulum arc and this is demonstrated by the mock pendulum during operation but the maker is clearly trying to experiment with the new technological developments that were coming into horology. The movement has been totally overhauled by me and is in as original condition as I can get it without removing any of its past history.

It is very rare that these timepiece clocks survived beyond the 19th century because they were in essence a base model without any frill, striking mechanisms or alarm work. They simply told the time and as is the case with “modern” 1950s mantle clocks of today, these basic clocks were mistreated and thrown away when worn out due to the cost of repairing them.

This clock has somehow managed to be carefully stored away when it finally became surplus to requirements or the cost of repair outweighed the value of the clock and stayed there for many years! The patina and simple elegance of this clock has to be seen to be fully appreciated and I believe it would be a very good addition to a valued collection or someone with an eye for Georgian style.

Nathaniel Style is recorded as working at Wood Street, Cheapside, London becoming free of the Clock makers Company in 1725 and retiring in 1773.
With over twenty years experience in restoring and conserving clocks and working on some of the finest and complicated clocks for a select group of the best antique clock dealers in the country, Overton Clocks has now decided to offer our customers the opportunity to purchase fine antique clocks that have been personally selected for their unique or special features. Each clock has been expertly restored to the highest of standards by myself. Overton clocks ensures peace of mind in your investment, by personally offering three years warranty on all of our timepieces.

This piece and many others are currently available for purchase on our selling antiques page.

Unfortunately this piece has been purchased. However we still have many pieces available for purchase on our selling antiques page.